November 2026 · 12 min read
Contractor Did Bad Work? The Evidence-First Guide to Getting It Fixed (or Getting Paid Back)
The tile is uneven. The roof started leaking three weeks after installation. The drywall finish looks like a first attempt — ridges, bubbles, and tool marks visible under any raking light. Your first instinct is to call the contractor and demand a fix. That call is the right move — but only if you make it after you've built your case.
Homeowners who go into that call with only photos and frustration almost always hear the same response: "That's within tolerance." Without documentation, it becomes your opinion against theirs. Homeowners who actually get defects fixed — or get paid back — take a different approach. They build the case first. There are three types of evidence that matter in a workmanship dispute, and one of them is a public record that most homeowners never think to check.
What actually counts as a contractor workmanship defect — and what is just normal variation?
A workmanship defect is a deviation from industry-standard tolerances or applicable building codes — not simply a result you don't like. Tile lippage over 1/8 inch, grout joint variance over 1/4 inch, roofing installed in violation of manufacturer specs, and drywall that fails the finish level specified in your contract all meet the threshold. Cosmetic preferences do not.
These are the nationally applicable tolerances that define the line between defect and variation:
- Tile lippage: 1/8 inch maximum adjacent tile height difference (ANSI A108.02). Above this is a documentable defect.
- Grout joints: Variance of 1/8 to 1/4 inch depending on tile size and specified grout width (TCNA Handbook standards).
- Drywall finish: Levels 1 through 5. Level 5 is smooth with no tool marks — specified for high-sheen paint environments. Level 3 is standard for most painted walls. If your contract specified Level 5 and the contractor delivered Level 3, that is a defect regardless of appearance preferences.
- Roofing: Must meet both manufacturer installation specifications and local building code. A manufacturer's warranty is void if installation doesn't follow the manufacturer's requirements — a contractor who voided your warranty by cutting corners has caused documented harm.
- Concrete flatwork: No gap greater than 3/16 inch under a 10-foot straightedge (ACI 117). Visible humps or dips are measurable, not just visual.
"That's within tolerance" is a common contractor deflection. The response is to cite the tolerance specifically — because tolerances are defined in published standards, not by the contractor. Building code violations are objective. If work failed a permit inspection, that is per se a defect with no tolerance argument available.
What evidence do you need before you say anything to the contractor?
You need three types of evidence. First, physical documentation: timestamped photos with measurements visible in frame. Second, independent professional assessment: a licensed inspector or competing contractor's written evaluation. Third, official records: the contractor's license classification and disciplinary history. Going in with only photos puts you at a disadvantage — contractors who do defective work regularly know how to handle photo-only complaints.
Type 1 — Physical documentation.Photograph every defect with a ruler or tape measure in frame so the measurement is part of the image, not just a claim. For large-area defects like drywall or flooring, shoot video walkthroughs under raking light — the light angle makes surface irregularities visible in a way flat-on photos don't. Back up everything to cloud storage immediately. Photos that exist only on your phone can be challenged; photos with metadata timestamps that pre-date your complaint are harder to dispute.
Type 2 — Independent assessment.A licensed home inspector's written report costs $300–$600 and carries professional authority. A written estimate from a competing licensed contractor to fix the work also works — the written cost to repair is both documentation and evidence of harm. Check whether the work passed or failed its permit inspection: permit inspection records are public, and a failed inspection is an official finding that the work didn't meet code.
Type 3 — Official records.This is the evidence most homeowners skip entirely — and it's often the most useful. We'll cover it in the next two sections.
Before the conversation, review the final walkthrough checklist and the punch list guide for a full picture of what should have been documented at completion.
Was your contractor actually licensed for this type of work?
A valid general contractor license does not automatically cover specialty trades. Roofing, HVAC, electrical, and plumbing each require separate license classifications in most states. If your contractor performed electrical work without an electrical classification, that is both a licensing violation and significant legal leverage — the work was done illegally, which strengthens both a licensing board complaint and any civil claim.
The classification system works like this: a general contractor license authorizes a contractor to manage and perform general construction work. It does not cover specific trades that require their own licensing pathway. Here are the classification mismatches that come up most often in workmanship disputes:
- A general contractor performs HVAC installation without a mechanical or HVAC classification — common on renovation projects where the GC "handles everything."
- A handyman performs plumbing work that exceeds the state's dollar threshold for unlicensed work, or installs fixtures that require a licensed plumber by code.
- A roofing contractor expands into electrical work for rooftop equipment without an electrical classification.
Tennessee's licensing board received 884 contractor complaints in 2024, with over $990,000 in civil penalties assessed — a significant portion of those cases involve contractors performing work outside their license classification. When a classification mismatch is involved, the work was done illegally. That changes the nature of your complaint and your civil position.
CheckLicensed.com shows license classification alongside license status — search your contractor to see exactly which trade categories their license covers. For more on contractor billing disputes where classification matters, see what to do if a contractor is overcharging you.
Does the contractor have a history of workmanship complaints?
State licensing boards record and publish disciplinary actions, including prior workmanship complaints. If the board shows two or three prior complaints about defects you're dealing with, your negotiating position changes from "my opinion vs. their opinion" to "documented pattern." Checking this before the first conversation is not optional — it determines what you say and how hard to push.
Prior complaints don't just strengthen your legal position. They change the conversation itself. "The board has three prior complaints about your tile work" is a fundamentally different opening than "I think this tile looks wrong." One is a personal grievance. The other is a pattern of professional conduct with documented corroboration.
BBB complaint history can serve as a corroborating signal in negotiations, though BBB records are not official government records and don't carry the same weight as a licensing board disciplinary finding. Use BBB as supplementary information, not primary evidence.
One important reality: California's CSLB closes more than 10,000 complaints each year without investigation. The complaints that move forward are specific, documented, and filed with enough evidence to establish a clear violation. This is not a reason to skip filing — it's a reason to build a strong complaint rather than a vague one.
Run a disciplinary history search on CheckLicensed.com before the first call. It takes two minutes and changes what you say in that conversation.
How do you tell a contractor their work is unacceptable?
Send a written summary before requesting a meeting. State specific defects by location and measurement — not by adjective. Reference the contract specification or building code that wasn't met. State the remedy you're requesting. Do not use emotionally charged language in the first communication.
The tone difference matters more than most homeowners realize. Compare these two approaches:
- Adjective-based (ineffective): "The tile in the master bath looks terrible and uneven and the grout is a mess."
- Measurement-based (effective): "The tile in the master bath has lippage exceeding 1/8 inch in 14 measured locations. This falls outside ANSI A108.02 tolerance standards. Per our contract's workmanship specifications, I am requesting a repair plan with a written timeline."
In writing, request three things: acknowledgment of the specific defects, a proposed repair plan with a completion timeline, and a written warranty on all repairs. These are reasonable requests — a contractor who refuses to put a repair timeline in writing is signaling something.
What to avoid in the first communication: threats of legal action, mentions of attorneys, social media ultimatums, and ultimatums tied to future payment for unrelated work. Keep the first round professional and specific. If the contractor denies the defects, respond with your independent assessment: "My licensed inspector documented the following measurements at [date and location]."
What are your escalation options if the contractor refuses to fix it?
In order of time and cost: withhold the next scheduled payment milestone if work is unfinished, file a licensing board complaint, file a bond claim, take it to small claims court for disputes under your state's limit, or hire a construction attorney for disputes that exceed the small claims ceiling or involve an unlicensed contractor.
Payment withholdingis only legitimate when tied to a future milestone that hasn't been reached. Withholding a payment already earned for completed work creates a breach on your side. Know the difference before you use this lever.
Licensing board complaint is most effective when you have a classification violation, documented prior complaints on record, or a building code failure. File while the situation is active, with photographs and documentation attached. A complaint filed six months later with no documentation rarely goes anywhere.
Bond claim is a faster path to recovery than a lawsuit in many cases. Licensed contractors carry surety bonds specifically to cover homeowner harm. The bonding company adjudicates the claim separately from any licensing board action or court filing, and the processes can run in parallel.
Small claims courthandles disputes without attorneys in most states. Limits range from $5,000 to $25,000 depending on the state. Filing fees are typically $30–$75. For disputes under the limit, small claims is almost always the right move before hiring an attorney.
Construction attorney threshold: dispute exceeds your state's small claims limit, contractor was unlicensed or used a classification they didn't hold, or contractor has gone dark after written demand. Many construction attorneys offer free consultations for workmanship disputes. For related guidance, see what to do if a contractor damages your property and what to do if a contractor is overcharging you.
Will homeowners insurance cover bad contractor work?
Almost certainly not. Standard homeowners insurance covers sudden, accidental damage — not workmanship defects, construction errors, or contractor negligence. The correct remedies are the contractor's surety bond, a licensing board complaint, a claim on the contractor's general liability insurance, or civil action. Waiting on homeowners insurance to cover a workmanship dispute is not a viable strategy.
Builder's risk policies are different from standard homeowners insurance and do cover certain construction-period damage — but most homeowners don't carry them, and a workmanship defect claim is distinct from construction-period damage regardless.
A contractor's general liability insurance may cover physical damage their work caused to your property — a roof leak that damaged your ceilings, for example. This is different from a workmanship defect claim. A GL claim goes to the contractor's insurer; the contractor's bond covers the contractor's failure to perform. These are separate instruments, and understanding which applies changes who you contact first.
How do you protect yourself before the next hire?
Verify three things before signing any contract: license status (is the contractor currently licensed?), license classification (are they licensed for the specific trade you're hiring them for?), and disciplinary history (do they have prior workmanship complaints on record?). Most homeowners only check the first. The classification and history checks catch what license status alone misses.
A three-part pre-hire checklist that takes 15 minutes:
- License status. Active and in good standing? Verify through your state board — not just the contractor's license number on a business card, which tells you nothing about current status.
- License classification. Does the license specifically cover the work you're hiring them to do? A general contractor license on a job that requires a specialty trade classification is a red flag before the work starts.
- Disciplinary history. Prior workmanship complaints, prior penalties, prior suspensions? This is the data that tells you whether other homeowners have already had your experience.
Verify these independently through the state board — not through what the contractor tells you. A contractor who hands you their license number and says "look it up" is fine; one who says "I'm licensed, trust me" is not.
Before the next hire, run a full check at CheckLicensed.com — license status, classification, and disciplinary history in one search. For what to document when the job wraps, see the final walkthrough checklist.
Frequently Asked Questions
What counts as a contractor workmanship defect?
A workmanship defect is a deviation from industry-standard tolerances or applicable building codes — not just a result you don't like. Examples include tile lippage over 1/8 inch (ANSI A108.02), grout joint variance over 1/4 inch (TCNA standards), roofing installed in violation of manufacturer specs, and drywall that doesn't meet the finish level specified in the contract. Cosmetic preferences alone don't qualify.
What should I do before confronting a contractor about bad work?
Build your case first. Photograph every defect with measurements in frame. Get an independent written assessment from a licensed inspector or competing contractor. Then check the original contractor's license classification and disciplinary history — a contractor who was unlicensed for the specific trade, or who has prior workmanship complaints on file, is in a fundamentally different position in any dispute.
Can a contractor be licensed but still not licensed for the work they did?
Yes. A general contractor license does not automatically cover specialty trades like HVAC, electrical, or plumbing. Each requires a separate classification in most states. If your contractor performed specialty trade work without the right classification, that is a licensing violation — which is both reportable to the board and strengthens any civil claim.
Will homeowners insurance cover bad contractor workmanship?
Almost never. Standard homeowners insurance covers sudden, accidental damage — not construction defects or contractor negligence. Your remedies are the contractor's surety bond, a licensing board complaint, a claim on the contractor's liability insurance, or civil action. Do not wait on homeowners insurance to cover a workmanship dispute.
Don't sign until you know who you're hiring.
License status is the easy part. We also pull complaints, BBB history, and verified reviews — then hand you one clear verdict. In your inbox in 1 hr or less.
Verify my contractor, $25 →CheckLicensed Editorial Team
We research contractor licensing laws across all 50 states and verify data against official state databases. Our goal is to make it easy for homeowners to hire with confidence.